:: White's Metal Detector Search Coil Rods and Hardware ::
For search coils, click here.

For search coil covers, click here.

 FYI: If you are over six feet tall, the Tall Man Rod is recommended for comfortable metal detecting. If you are under five feet, most models have a center rod section that can be omitted. 

Lower Tall Man Rod (fiber) #500-0242-3  $9.95

Replacement lower rod section connecting the loop to the upper aluminum rod (10" longer than standard.
SL Tall Man Rod  #500-0240-1  $19.95
Lengthened version of the standard "S" rod for use with any SL model, and SL style hipmount rod (11" longer than standard).
Fiber Rod  #500-0242-1  $9.95

Replacement lower rod section connecting the loop to the upper aluminum rod. When used with older models requires #802-5096-11 Adapter Kit.

Diver Rod Kit  #802-5195-1  $39.95

Converts handheld Surfmasters to short rod for scuba use.
XLT® Hipmount Kit  #802-5260  $59.95

Extension cable included. Hipmounts any XLT model. Use separate XLT rod.
SL Hipmount Kit  #802-5259  $49.95

No extension cable. Hipmounts any SL model. Uses separate SL rod. Stainless steel bracket mounts on control box and allows the angle of the control box to be tilted for optimum display viewing.

Space Saver Rod Kit  #802-5236  $39.95

Converts Classics and early Goldmaster models from the standard two-piece rod assembly to a three-section assembly for tighter packing. (Does not fit Classic SL series instruments.)
Heavy Duty Clevis Kit  #802-5196-3  $6.95

Old-style separate clevis for pre-1988 models. Connects loop to lower rod.
Loop Adapter Kit  #802-5096-14  $3.95

Needed if replacing 1979 to early 1992 clevis or isolator with the later version lower fiber rod.
Loop Steadying Bracket  #802-5190-4  $9.95

Fits Blue Max 950 and Surfmaster loops. Locks the loop angle in place for working in brush, water or tall weeds. Angle can be adjusted
3/8" Loop Hardware  #802-5096-11  $1.50

Replacement nut, bolt and washers for current models.

5' Extension Cable for DFX and MXT #802-7025  $29.95

Extends loop cable length by approximately 5'. Heavy duty for the DFX and MXT.

5' Extension Cable  #802-7202  $24.95

Extends loop cable length by approximately 5'. Replacement extension for hipmount kits manufactured from 1979 through 1988.

You'll get fast, personal service from your factory authorized local White's dealer!

[top of page]